Aspire K1 Stealth 1000mAh 12W MTL Starter Kit
Newest Aspire K1 Stealth MTL Vape kit, with the sleek compact ergonomic design, feels good in the palm of your hand. it includes the K1 Stealth Battery and K1 Plus Tank. the K1 Stealth Battery built-in 1000mAh battery and equipped with the wattage setting, the 8W, 10W, 12W, vapers can adjust the working wattage for the warmer or cooler vape by pressing the bottom mode button twice in rapid. the LED light indicator will turn on to indicate the level of the output wattage. vapers can charge the Aspire Battery by connecting to the wall adapter or power bank via the micro USB port, the indicator light will show you the charging status. the K1 Plus Tank can hold 2.4ml e-juice, comes with 1.6ohm and 1.8ohm replacement coil heads for regular e-liquid or nic salts. the K1 tank also compatible with the Aspire BVC Coils and Aspire Spryte Coils. there is 16mm 510 magnet adapter at the base of the tank, simply screw the metal connecting to the bottom of the K1 plus tank, then insert the tank into the mod, the tank will draw into the mod and behold in place magnetically, vapers only taking a glance on the K1 Plus Tank will know the e-juice level. the Aspire Tank with convenient top e-juice refill and bottom airflow adjustable design, easy to refill and adjust the air flow freely. the newest Aspire MTL Kit will give vapers a new experience in stealth vaping.
K1 Stealth Battery Features:
- Size: 68*39mm
- Colors: SIlver, Black
- Built-in 1000mAh Battery
- 8W. 10W, 12W, Three Working Wattage Setting
- LED Light Indicator
- Micro USB Port For Charging
- Automatic Cut-Off
- Short Circuit Protection
- Low Voltage Protection
- Over-Charge Protection
- Over-Heat Protection
K1 Plus Tank Features:
- Size: 82*21mm
- 2.4ML E-Juice Capacity
- Coils:
- Coil Material: Nichrome + Organic Cotton
- 1.8ohm, 9-13W
- 1.6ohm, 6-11W
- Compatible With Aspire BVC Coils And Spryte Coils
- Convenient Top E-Juice Refill Design
- 4 Bottom Airflow Adjustable Slots
- 16mm 510 Magnet Adapter
Includes:
1*k1 Stealth Mod
1*K1 Plus Tank
2*Nichrome Coils(1.6ohm, 1.8ohm(Pre-installed))
1*Metal Connecting Ring
1*USB Cable
1*User Manual
1*Warranty Card
Note: please ensure you have basic knowledge on how to properly to use it.
1)If the tanks use sub ohm coils, vapers must be sure that your device and batteries can handle sub ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub ohm tank. the tank only works with the mod that can support the atomizer and coil. if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm. improper use and lead to injury or damage.use the OHMS LAW Calculator to check.if you have a question, please feel free to contact us.
2)if the coils are sub ohm coils, the user should be sure that the tank and mods can handle the sub ohm resistance coils, please make sure you have the great understanding of them, if you are not sure, please do not order and use, welcome contact us any time to get help.
3)users need to pay attention to Li-ion cells when vaping. the batteries very sensitive to charging characteristics and may explode or burn if mishandled. so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave a charging battery unattended. we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers. the device always recommends work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.
4) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc. please have a basic knowledge of batteries.welcome to contact us anytime to get help.
