Vsticking VKsma 25W Temp Control BF Vape Kit
The Vsticking VKsma 25W Temp Control BF Vape Kit, with the modern and portable design, comfortable to grip. the Vsticking Mod built-in 1400mAh battery, there is one 0.69 inch OLED display and the round ergonomically buttons, can use the buttons to adjust the working wattage and adjust the working modes, the OLED screen will show you the working wattage, working mode and battery life clearly. there is a liquid bottle inside the VKsma Mod, it can hold 3ml e-juice, auto bottom filling keep e-liquid fresh away from heat source. the Vsticking VKsma supports the SMI RADA and SMA ADA. the SMI RADA is the rebuildable auto dripping atomizer. it supports the temp control Coils and the resistance must between 0.2ohm to 1.0ohm, this dripping atomizer only works under DIY mode. the SMA ADA is the auto dripping atomizer, the 0.3ohm NI211 NI-MN alloy Coil and 1.0ohm SS316 Coil available, supports the Auto Mode and DIY Mode. the innovative Vsticking Kit with complete TC control and dry burn prevention will deliver the full flavor with every puff.
Vsticking VKsma Mod Features:
- Material: Zinc Alloy
- Colors: Zigzag Silver, Coral Silver, Carbon Gunmetal, Diamond Gunmetal, Skull Black, Flame Black, Leather Black, Suede Black
- Size: 79*47.5*18.6mm
- Built-in 1400mAh Battery
- 0.69 Inch OLED Display
- Working Modes: Auto Modes / DIY Mode
- Auto Modes: P1(10-15W) / P2 (20-25W) [ 0.3ohm NI211 Coil] / P1( 5-6W ) / P2 ( 10-12W ) [1.0ohm SS316 Coil ]
- DIY Mode: 10-35J
- Temp Control Range: 180-260°C (356-500°F)
- Output Voltage: 1.73-3.5V
- Charging Voltage And Current: DC5V/1A
- E-Liquid Tank Capacity: 3ML
SMI RADA(Rebuildable Auto Dripping Atomizer) Features:
- Material: Stainless Steel + PEI
- Size: 33.5*15.5mm
- TCR Setting: NI211=0.00600, SS316=0.00088, TI01=0.00350, NI200-0.00680
- Supports Temp Control Coils Only The Resistance Range Between 0.2ohm-1.0ohm
- Working Mode: DIY Mode
SMA ADA(Auto Dripping Atomizer) Features:
- Material: Brass + PP
- Size: 28.1*14mm
- Coil Material And Resistance: 0.3ohm NI211 Ni-Mn Alloy Coil / 1.0ohm SS316
- Working Modes: Auto Mode + DIY Mode
Includes: (SMA ADA)
1*Vsticking VKsma Mod
1*SMA ADA(Pre-Installed 0.3ohm NI211 Coil)
1*3ML Liquid Tank
1*Silicone Cap For E-Liquid Tank
1*User Manual
Includes:(SMI RADA)
1*VSticking VKsma Mod
1*SMA ADA(Pre-Installed 0.3ohm NI211 Coil)
1*SMI RADA
1*3ML E-Liquid Tank
1*Silicone Cap For Liquid Tank
1*User Manual
Note: please ensure you have basic knowledge on how to properly use it.
1)If the tanks use sub-ohm coils, vapers must be sure that your device and batteries can handle sub-ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub-ohm tank. the tank only works with the mod that can support the atomizer and coil. if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm. improper use and lead to injury or damage. use the OHMS LAW Calculator to check. if you have a question, please feel free to contact us.
2)users need to pay attention to Li-ion cells when vaping. the batteries very sensitive to charging characteristics and may explode or burn if mishandled. so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave a charging battery unattended. we will not responsible for damage to the human reason or mishandling of Li-ion batteries and chargers. the device always recommends work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.
3) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods. please have a basic knowledge of batteries. Welcome to contact us anytime to get help.
